Technical details
The ESE 9000 TH-ED petrol generator is produced by Endress Group Romania under the Zenessis brand. Zenessis power generators are guaranteed for 36 months, up to 2000 operating hours.
Standard features
| Control & command panel with measurements & control devices |
| 400 V/ 230 V sockets (as appropriate) |
| Dynamic alternator charging batteries ori |
| Oversized start battery |
| Emergency stop button |
| Fuel tank sized for long autonomy |
| Vibration dampers |
| Electrical lines protected with tubing & gland |
| Exhaust pipe |
| Thermal magnetic and short circuit protection |
| Access panels with mounting/removal facility |
| Crane or forklift handling system |
| Flameproof and soundproof insulation |
Petrol engine
Engine
| Producer | HONDA |
| Model | GX390 |
| Model | air-cooled, 3000 rpm, 1 inclined cylinde |
| Cylindrical capacity | 0,389 l |
| Power HP | 13,0 la 3000 rpm |
| Fuel | Petrol |
| Fuel consumption (g/ kW/ h) | 313 |
| Turn on | Electrica |
| Optional | Automatic start with AAR |
Standard features
Alternator
| Model | Linz E1S10M |
| Voltage (V) | 230 V – 400 V |
| Frequency (Hz) | 50 Hz |
| Rated power | 9,0 kVA |
| Type of excitation | Self-excited |
| Adjustment type | AVR |
| Power factor | 0,8 |
| Protection | IP21 |
Control panel
Standard specifications automatic control panel with AAR included (optional):
The command and control panel is mounted outside the housing, in a metal box with IP 54, equipped with:
| Control module ComAp AMF 9 |
| Static battery charger |
| Emergency stop button & circuit breaker fuses control |
| Fast connection socket |
| Protection relays |
| Contactor generator |
| Network contactor |
| Measuring transformers |
Control panel
| 1. Multi-pin plug coupling automation |
| 2. Single-phase 230V/16A socket |
| 3. Single-phase 230V/32A socket |
| 4. Voltmeter |
| 5. Operating hours counter |
| 6. Contract key |
| 7. Cold start electric shock |
| 8. Imamantare premium |
Configuration
| Microprocessor control |
| 132 x 64 pixeli LCD display |
| Programming on front panel as well as through PC software |
| Control buttons and soft touch navigation |
| Remote communication via USB or with optional modules via RS232, RS485, Ethernet or SMS |
| Store 180 events with date and time |
| Maintenance programming 3 levels |
| Engine heater control –Optional |
Command module standard specifications:
Configuration
| 1. ComAp AMF 9 control module |
| 2. Panel locks |
| 3. On/Off button |
| 4. Damage button |
| 5. IP55 control box |
Displays:
| Engine – engine speed; oil pressure; coolant temperature; running time; battery voltage; maintenance data. |
| Alternator – voltage (L – L, L – N); current (L1 – L2 – L3); frequency; kW; Pf; kVAr; kWh,kVAh, kVarh; phase sequence. |
| Main network – voltage (L – L, L – N); frequency, mains ready; mains off; generator set ready, generator set disconnected, active power kW, apparent power kVA, reactive power kVA r, power factor, phase sequence. |
| Warning – battery faulty charging, low battery voltage, fail to stop, low fuel level, overload, phase reversing, speed sensor failure. |
| Alarms – low oil pressure, high engine temperature, under / over voltage, under / overfrequency, under / overvoltage, ECU fault -optional. |
| Status displays – missed start, emergency stop, low oil pressure, high engine temperature, under / overspeed, under / overfrequency, under / overvoltage, oil sensor, phase rotation, overload, overcurrent group, phase reversal. |
Static battery charger:
Made with TSD technology, with high efficiency. Protected for short- circuit currents, it can be used as a current source, input voltage 196-264 V, output voltage 27.6 V / 5A or 13.8 V / 5A.
Standard
Electrical safety / EMC, BS EN 60950; BS EN 60950 – 6 – 2 EMC; BS EN 61000 – 6 – 4 EMC.
Housing
Made of galvanized steel, painted in electrostatic field, soundproofed. The housing are designed to optimize the cooling of the engine and alternator assembly, and can be mounted outdoors, providing protection against weathering and low noise levels.
Housing
| 1. Mobile access cover |
| 2. Stainless steel enamellers |
| 3. Single-faceted primer |
| 4. Socket multipin automatic connection |
| 5. Air inlet grilles |
| 6. Flexible pads |
| 7. Residential exhaust pipe |
| 8. Air exhaust fans |
| 9. Information equipment |
Dimensions and weight
Dimensions and weight of the closed genset
| Sizes (length x width x height) (mm) | 1200 x 700 x 1070 |
| Weight (kg) | 130 |
| Fuel tank capacity (liters) | 6,1 |
| Sound level @ 7m | 68 |
Optional features
| Electrical panel anti-condensation heating system |
| Fuel heating system |
| Indoor heating system |
| Remote monitoring & control system |
| Automatic control panel with AAR transfer board included |
| Bypass panel – ENDRESS patented invention – OSIM patent 00010 / 2012 |
| Trailer |
| Start by remote control |
| Groundless protection |
| Liquid retention tray |
| Liquid leakage detection sensor |
Optional: RAR approved auto trailer
Endress Group Romania S.R.L. certifications:
ISO 9001 : 2008, ISO 14001 : 2005, ISO 18001 : 2008.
ZENESSIS generators are CE compliant, and are tested according to the EU legislation on noise levels 2000 / 14 / EC.
Reference ambient conditions: 1000 mbar; 25° C; 30% relative humidity; power according to ISO 3046 / ISO 8528 standards
Prime power (PRP) – ISO 8528
Primary power (PRP) – is the continuous power that a generator is capable of supplying continuously while supplying a variable electrical load when operating for an unlimited number of hours per year under agreed operating conditions, within the maintenance intervals and procedures prescribed by the manufacturer.
Standby power (ESP) – ISO 8528
Standby power (ESP) is the maximum power available at a variable load, under the operating conditions provided, that a generator is able to provide in case of power failure or under test conditions, maintenance intervals and procedures being performed as prescribed by the manufacturer.
