Detalii tehnice
The ESE 440 TIA diesel generator produced by Endress Group Romania under the Zenessis brand is equipped with IVECO Stage V F34TEVB02 engine, MarelliMXB-E 180 SC4 / Strathon ECO 42 KW alternator and ComAp INTELILITE AMF 25 control system, which ensures the starting of the generator, the control of the parameters, in manual or automatic system. The generator can be supplied with remote control and monitoring as well as other options. Zenessis power generators are guaranteed for 36 months, up to 2000 operating hours.
Dotari standard
Control & command panel with metal measuring & control devices, IP 54 protection rating |
Static battery charger |
Dynamic battery charging alternator |
Chassis with fuel tank sized for. 8 hours autonomy |
Oversized start battery |
Emergency stop button |
Chassis with fuel tank sized for 8hrs of autonomy |
Vibration dampers |
Fuel level measuring device |
Electrical lines protected with tubing & gland |
Residential silencer |
Thermostat heater ordered for. coolant |
Oversized start battery |
Emergency stop button |
Access doors on all 4 sides provided with locks |
Crane or forklift handling system |
Flameproof and soundproof insulation |
Protective pads |
Metal hinges |
Access doors with locks |
Crane or forklift handling system |
Flameproof and soundproof insulation |
Motor diesel Iveco
Motor
Model | F34TEVB02 |
Model | IVECO |
No. of cylinders & arrangement | 4 in linie |
Cooling system | With liquid |
Displacement (l) | 3,4 |
Injection system | Turbine |
Maximum standby power (kWm) | 38 |
Speed (rpm) | 1500 |
Inside diameter & stroke (mm) | 99 x 110 |
Compression factor | 17:1 |
Regulator | Electronic |
Total oil capacity (l) | 9,5 |
Engine cooling agent capacity (l) | 11 |
Fuel consumption at 100% load in prime mode (l / h) | 9,3 |
Alternator
Alternator Marelli / Strathon
Model | MJB 315MA4 / ECO 450 KW |
Frequency (Hz) | 50 Hz |
Concept | Brushless, 4 poles |
Phases | 3 |
Voltage (V) | 400 / 230 V |
Protection class | H |
Excitation system | Electronic |
Performance | 93% |
Protection | IP23 |
Certification test | test EN 10204:2001 |
Panou de comanda
Made in metal box, IP54 degree, with lock. The control panel is equipped with
control unit ComAp Inteli Lite NT AMF25, equipped with the possibility of starting and stopping the genset, both in
automatic and electric mode. The control module monitors the power grid and can also control
control the AAR panel (automatic reserve boost).
Specificatii standard panou comanda:
The command and control panel is mounted inside the housing, in a metal box with IP 54, provided with
viewing window, equipped with:
Modul comanda Inteli Lite NT AMF 25 |
Static battery charger |
Emergency stop button & circuit breaker fuses control |
Overcurrent differential protection |
Protection relays |
Panou comanda
1. Left button |
2. Right button |
3. Horn Reset button |
4. Fault Reset button |
5. Up button |
6. Page button |
7. 7. Down button |
8. Enter button |
9. Start button |
10. Stop button |
11. GCB button. Works in MAN and TEST modes only 12. MCB button. Works in MAN and TEST modes only |
12. MCB button. 12. MCB button. Works in MAN and TEST modes only |
13. Generator status indicator |
14. GCB On. Green LEDs are on if GCB is closed and Gen-set is healthy |
15. Load |
16. Graphic B/W display, 132 x 64 pixeli |
17. Mains status indicator |
18. MCB On. Green LEDs are on if MCB is closed and Mains is healthy |
Configuratie
1. Inteli Lite NT AMF 25 control module |
2. Circuit Breaker protection |
3. Locks |
4. Alarm |
5. START button ON / OFF |
6. Hinges |
7. Maintenance schedule |
8. Metal box |
Specificatii standard modul comanda:
Configuratie
– Microprocessor control |
– Display LCD 132 x 64 pixeli |
– Programming possibility on the front panel as well as via PC software |
– Soft touch navigation and control buttons |
– Remote communication via USB plug or optionally via RS232, RS485, Ethernet or sms message |
– 180 events memory with date and time |
– Maintenance programming 3 levels |
– Engine heater control -optional |
Afisaje:
Engine – engine speed; oil pressure; coolant temperature; running time; battery voltage; maintenance data. |
Alternator – voltage (L – L, L – N); current (L1 – L2 – L3); frequency; kW; Pf; kVAr; kWh,kVAh, kVarh; phase sequence. |
Main network – voltage (L – L, L – N); frequency; main network ready; main network uncoupled; group ready electrogen; uncoupled electrogen, , active power kW, apparent power kVA, reactive power kVA r, power factor, phase sequence. |
Warnings – : battery mischarge, low battery voltage, missed shutdown, low fuel level, overload, phase reversal, speed sensor fault. |
Alarms – low oil pressure, high engine temperature, under / over voltage, under / overfrequency, under / overvoltage, ECU fault -optional. |
Status displays – failed start, emergency stop, low oil pressure, high engine temperature, under/overload, under/over frequency, under/over voltage, oil sensor fault, phase rotation, overload, group overcurrent, phase reversal. |
Incarcator static baterie:
manufactured with high efficiency TSD technology. Protected against short circuit currents, can be used as a power source, input voltage 196-264 V, output voltage 27.6 V/5A or 13.8 V/5A
Standarde
Electrical safety / EMC, BS EN 60950; BS EN 60950 – 6 – 2 EMC; BS EN 61000 – 6 – 4 EMC.
Carcasa
Made of galvanized steel, painted in electrostatic field, soundproofed. It is modularly designed with in-door access doors on all sides of the generator. The exhaust pan is residential type, mounted inside the casing. The housing are designed to optimize the cooling of the engine and alternator assembly, and can be mounted outdoors, providing protection against weathering and low noise levels. Painting is done with polyurethane paint with UV protection.
Carcasa insonorizata
1. Command module |
2. View window |
3. Access door for control module |
4. Points for crane lifting (optional) |
5. Spaces for handling with the forklift |
6. Engine and alternator access door |
7. Air intake grills |
8. Handles provided with locks |
9. Fuel supply bus (optional) |
10. „Sleigh chassis” fitted with lifting/pulling holes |
11. Emergency button |
12. Exhaust Gas Valve |
13. Cable access space |
14. Hot air outlet grills |
15. Protective pads |
Dimensiuni si greutate
Dimensiuni si greutate grup electrogen deschis
Sizes (length x width x height) (mm) | 2300 x 1010 x 2000 |
Weight (kg) | 750 |
Fuel tank capacity (liters) | 100 |
Ambient noise level (at 7m distance) | 85 db |
Dimensiuni si greutate grup electrogen inchis
Sizes (length x width x height) (mm) | 2690 x 1110 x 1565 |
Weight (kg) | 930 |
Fuel tank capacity (liters) | 100 |
Ambient noise level (at 7m distance) | 72 db |
Dotari optionale
Electrical panel anti-condensation heating system |
Fuel / oil heating system |
Coolant heating circulation pump |
Oil drain pump |
Motorized ATS, ENDRESS patented invention – OSIM patent 00048 / 2015 |
AAR transfer panel with 3/4 poles |
3/4 pole differential protection |
Sokets 400 V/ 230 V |
Fuel filter with water detection |
Bypass panel – ENDRESS patented invention – OSIM patent 00010 / 2012 |
Trailer |
Start by remote control |
Groundless protection |
Interior lightings with switches operated at doors opening |
Liquid retention tray |
Liquid leakage detection sensor |
Remote monitoring & control system |
External fuel feed nozzle with lock |
Pocket system integrated in the chassis for lifting with forklift |
Fire extinguisher with internal housing support |
Super soundproof housing |
Intake air heating spark plug |
Grounding electrodes |
Fuel transfer automatic pump |
Mobile distribution panel with 4 sockets |
Cable reel |
Fire detector with automatic shutdown generator set |
Fire extinguishing system with inert gas |
Optional: Remorca auto omologata RAR
Model: EGR 6000
Certificari Endress Group Romania S.R.L.:
ISO 9001 : 2008, ISO 14001 : 2005, ISO 18001 : 2008.
Grupurile electrogene ZENESSIS sunt conforme CE,si sunt testate conform legislatiei EU privind nivelul de zgomot 2000 / 14 / EC.
Reference ambient conditions: 1000 mbar; 25° C; 30% relative humidity; power according to ISO 3046 / ISO 8528 standards
Prime power (PRP) – ISO 8528
Primary power (PRP) – is the continuous power that a generator is capable of supplying continuously while supplying a variable electrical load when operating for an unlimited number of hours per year under agreed operating conditions, within the maintenance intervals and procedures prescribed by the manufacturer.
Standby power (ESP) – ISO 8528
Standby power (ESP) is the maximum power available at a variable load, under the operating conditions provided, that a generator is able to provide in case of power failure or under test conditions, maintenance intervals and procedures being performed as prescribed by the manufacturer.