Diesel generator ESE 6000 SK-ED

Engine manufacturer
Kohler
Fuel
Diesel
Amperage
22
Power (kVA)
6,0 / 5,4
Power (kW)
5,4 / 4,9
Request quote

Technical details

The ESE 6000 SK-ED diesel generator is produced by Endress Group Romania under the Zenessis brand. Zenessis power generators are guaranteed for 36 months, up to 2000 operating hours.

Standard features

Control & command panel with measurements & control devices
400 V/ 230 V sockets (as appropriate)
Dynamic alternator charging batteries ori
Oversized start battery
Emergency stop button
Fuel tank sized for long autonomy
Vibration dampers.
Electrical lines protected with tubing & gland
Exhaust pipe
Thermal magnetic and short circuit protection
Access panels with mounting/removal facility
Crane or forklift handling system
Flameproof and soundproof insulation

Diesel engine

Engine

Power generatorsKOHLER
Model KD440
Model air-cooled, 3000 rpm, 1 cylinder
Cylindrical capacity0,442 l
Power HP10,5 la 3000 rpm
Fuel Diesel
Aspiration Natural
Autonomy at 75% of the load10 hours
Fuel consumption 1.9 l at 75% of the capacity
Turn on Electrica
Optional automatic start with AAR

Standard features

Alternator

ModelLinz E1C110M
Voltage (V)230 V
Frequency (Hz) 50 Hz
Rated power8,0 kVA
Rated current 230V31 A
Type of excitation Self-excited
Adjustment typeAVR
Power factor 0,9
Protection IP21

Control panel

Standard specifications automatic control panel with AAR included (optional):

The command and control panel is mounted outside the housing, in a metal box with IP 54, equipped with:

Control module ComAp AMF 9
Static battery charger
Emergency stop button & circuit breaker fuses control
Fast connection socket
Protection relays
Contactor generator
Network contactor
Measuring transformers

Control panel

1. Multi-pin plug coupling automation
2. Single-phase 230V/16A socket
3. Single-phase 230V/32A socket
4. Voltmeter
5. Operating hours counter
6. Contract key
7. Cold start electric shock
8. Imamantare premium

Configuration

Microprocessor control
132 x 64 pixeli LCD display
Programming on front panel as well as through PC software
Control buttons and soft touch navigation
Remote communication via USB or with optional modules via RS232, RS485, Ethernet or SMS
Store 180 events with date and time
Maintenance programming 3 levels
Engine heater control –Optional

Command module standard specifications:

Configuration

1. ComAp AMF 9 control module
2. Panel locks
3. On/Off button
4. Damage button
5. IP55 control box

Displays:

Engine – engine speed; oil pressure; coolant temperature; running time; battery voltage; maintenance data.
Alternator – voltage (L – L, L – N); current (L1 – L2 – L3); frequency; kW; Pf; kVAr; kWh,kVAh, kVarh; phase sequence.
Main network – voltage (L – L, L – N); frequency, mains ready; mains off; generator set ready, generator set disconnected, active power kW, apparent power kVA, reactive power kVA r, power factor, phase sequence.
Warning – battery faulty charging, low battery voltage, fail to stop, low fuel level, overload, phase reversing, speed sensor failure.
Alarms – low oil pressure, high engine temperature, under / over voltage, under / overfrequency, under / overvoltage, ECU fault -optional.
Status displays – missed start, emergency stop, low oil pressure, high engine temperature, under / overspeed, under / overfrequency, under / overvoltage, oil sensor, phase rotation, overload, overcurrent group, phase reversal.

Static battery charger:

Made with TSD technology, with high efficiency. Protected for short- circuit currents, it can be used as a current source, input voltage 196-264 V, output voltage 27.6 V / 5A or 13.8 V / 5A.

Standard

Electrical safety / EMC, BS EN 60950; BS EN 60950 – 6 – 2 EMC; BS EN 61000 – 6 – 4 EMC.

Housing

Made of galvanized steel, painted in electrostatic field, soundproofed. The housing are designed to optimize the cooling of the engine and alternator assembly, and can be mounted outdoors, providing protection against weathering and low noise levels.

Housing

1. Mobile access cover
2. Stainless steel enamellers
3. Single-faceted primer
4. Socket multipin automatic connection
5. Air inlet grilles
6. Flexible pads
7. Residential exhaust pipe
8. Air exhaust fans
9. Information equipment

Dimensions and weight

Dimensions and weight of the closed genset

Sizes (length x width x height) (mm)1200 x 700 x 1070
Weight (kg)130
Fuel tank capacity (liters)4,3
Sound level @ 7m68

Optional features

Electrical panel anti-condensation heating system
Fuel heating system
Indoor heating system
Remote monitoring & control system
Automatic control panel with AAR transfer board included
Bypass panel – ENDRESS patented invention – OSIM patent 00010 / 2012
Trailer
Start by remote control
Groundless protection
Liquid retention tray
Liquid leakage detection sensor

Optional: RAR approved auto trailer

Endress Group Romania S.R.L. certifications:

ISO 9001 : 2008, ISO 14001 : 2005, ISO 18001 : 2008.

ZENESSIS generators are CE compliant, and are tested according to the EU legislation on noise levels 2000 / 14 / EC.

Reference ambient conditions: 1000 mbar; 25° C; 30% relative humidity; power according to ISO 3046 / ISO 8528 standards

Prime power (PRP) – ISO 8528

Primary power (PRP) – is the continuous power that a generator is capable of supplying continuously while supplying a variable electrical load when operating for an unlimited number of hours per year under agreed operating conditions, within the maintenance intervals and procedures prescribed by the manufacturer.

Standby power (ESP) – ISO 8528

Standby power (ESP) is the maximum power available at a variable load, under the operating conditions provided, that a generator is able to provide in case of power failure or under test conditions, maintenance intervals and procedures being performed as prescribed by the manufacturer.

Fill in the offer request: