zenessis_gaz

Natural gas generato ESE 165 TBG

Engine manufacturer
Baudouin
Fuel
Gas
Amperage
217
Power (kVA)
165 / 150
Power (kW)
132 / 120
Request quote
Series Power KVA Amperage Engine manufacturer Power KW
ESE 687 TBG687.5 / 625906Baudouin550 /500
ESE 312 TBG312 / 283410Baudouin250 / 226
ESE 250 TBG250 / 225326Baudouin200 /180
ESE 206 TBG206 / 187.5271Baudouin165 / 150
ESE 165 TBG165 / 150217Baudouin132 / 120
ESE 125 TBG125 / 112165Baudouin100 / 90
ESE 110 TBG110 / 100145Baudouin88 / 80
ESE 40 TBG40 / 37.554.37Baudouin33 / 30

Technical details

The ESE 165 TBG natural gas generator produced by Endress Group Romania under the Zenessis brand is equipped with BAUDOUIN WP10D158E300NG engine, AFA alternator and INTELILITE AMF 20 control system, which ensures the starting of the generator, control of parameters, in manual or automatic system. The generator can be supplied with remote control and monitoring as well as other options. Zenessis power generators are guaranteed for 36 months, up to 2000 operating hours.

Standard features

Command & control panel with measurement & metal control devices, protection class IP54
Static battery charger
Dynamic battery charging alternator
Oversized start battery
Radiator triopical 50 / 55 °C
Emergency stop button
Vibration dampers
Electrical lines protected with tubing & gland
Residential silencer
Protection for hot components
Exhaust vibration compensator

Engine

Engine

EngineBAUDOUIN
ModelWP10D158E300NG
No. of cilinders & arrangement6 in linie
Suction & coolingTurbocharged & Water cooled
Speed (rpm)1500 rpm
Prime Power (kW)144 kW
Displacement (l)9.72 I
Bore & Stroke (mm)126 x 130 mm
Compression factor11.5 : 1
Regulator ECU
Total oil capacity (l)19 I
Engine coolant capacity35 l
Exhaust gas temperature ≤650 °C

Standard features

Alternator

ModelAFA
Frequency (Hz)50 Hz
Voltage (V)400 / 230 V
Concept Brushless, single bearing
Power factor 0.8
Protection class IP23
Insulation classH

CONTROL SYSTEM ComAp AMF 20

The command and control panel is mounted in a metal box with IP 54, mounted inside the generator, provided with glass for viewing from outside, equipped with:

Devices

Control module ComAp AMF 20
Static battery charger
Emergency stop button & circuit breaker fuses control

Control panel

1. Left button
2. Right button
3. Horn Reset Button
4. Fault Reset button
5. Up button
6. Page button
7. Down button
8. Enter button
9. Start button
10. Stop button
11. GCB button. Works in MAN and TEST modes only 12. MCB button. Works in MAN and TEST modes only
12. MCB button. 12. MCB button. Works in MAN and TEST modes only
13. Generator status indicator
14. GCB On. Green LEDs are on if GCB is closed and Gen-set is healthy
15. Pregnancy
16. Graphic B/W display, 132 x 64 pixeli
17. Mains status indicator
18. MCB On. Green LEDs are on if MCB is closed and Mains is healthy

Configuration

Microprocessor control
132 x 64 pixeli LCD display
Programming on front panel as well as through PC software
Control buttons and soft touch navigation
Remote communication via USB or with optional modules via RS232, RS485, Ethernet or SMS
Store 180 events with date and time
Maintenance programming 3 levels
Engine heater control –Optional

Displayed parameters:

Motor turatie motor; presiune ulei; temperatura agent racire; timp functionare; tensiune baterie; nesecitate efectuare mentenanta motor.
Generator tensiune (L – L, L – N); curent (L1 – L2 – L3); frecventa; curent impamantare; kW; Pf; kVAr; kWh, kVAh, kVArh; secventa faza.
Retea principala – tensiune (L – L, L – N); frecventa.

Circuit protection:

Avertizari esec incarcare; subtensiune baterie; esec oprire; indicator nivel combustibil scazut – optional; suprasarcina kW; secventa faza negativa.
Pre-alarme presiune scazuta ulei; temperatura ridicata motor; temperatura scazuta motor; sub / supraturatie; sub / suprafrecventa generator; sub / supratensiune generator; avertizare ECU.
Opririesec pornire; oprire de urgenta; presiune scazuta ulei; temperatura ridicata motor; nivel scazut agent racire; sub / supraturatie; sub / suprafrecventa generator; sub / supratensiune generator; senzor presiune ulei deschis; inversare faza.
Soc electric – impamantare; suprasarcina kW; supracurent generator; secventa faza negativa.

Standards: electrical safety / EMC compatibility

BS EN 60950; BS EN 60950 – 6 – 2 EMC; BS EN 61000 – 6 – 4 EMC.

Housing

Made of galvanized steel, electrostatically painted, acoustically soundproofed, provides protection against water ingress. It is modularly designed with indoor access uses. The exhaust is of residential type, mounted inside the housing and ensures a noise level in accordance with directive 2000/14/EC. The access doors are equipped with locks.

Housing

1. Steel structure, fuel tank included; the casing is made of sheet steel, galvanized, electrostatically painted, soundproofed.
2. Emergency stop button
3. The control panel is mounted on the chassis; located on the right side of the generator set.
4. Corrosion resistant hinges & hinges
5. The oil can be drained off with a tap and a hose
6. Exhaust system inside the housing
7. Large access doors for easy maintenance
8. Front & rear – large access doors for easy maintenance
9. Chassis – fuel tank
10. Lifting points for crane
11. Access to radiator cap – on the housing cove
12. Noise attenuation / soundproofing materials
13. Air intake/exhaust grilles

Dimensions and weight

Dimensions and weight of open genset

Sizes (length x width x height) (mm)2750 x 1110 x 1596
Gross weight (kg)1860

Dimensions and weight of the closed genset

Sizes (length x width x height) (mm)La cerere
Gross weight (kg)La cerere

Optional features

Electrical panel anti-condensation heating system
Oil drain pump
Remote monitoring & control system
Electromechanical or motorised 3 / 4 pole AAR load transfer panel
Electromechanical or motorised 3 / 4 pole CB protection switch
Detour board – patented invention ENDRESS – Patent OSIM 0010 / 2012
Remote radiator
Tropical use air filter
Trailer

Endress Group Romania S.R.L. certifications:

ISO 9001 : 2008, ISO 14001 : 2005, ISO 18001 : 2008.

ZENESSIS generators are CE compliant, and are tested according to the EU legislation on noise levels 2000 / 14 / EC.

Reference ambient conditions: 1000 mbar; 25° C; 30% relative humidity; power according to ISO 3046 / ISO 8528 standards

Prime power (PRP) – ISO 8528

Primary power (PRP) – is the continuous power that a generator is capable of supplying continuously while supplying a variable electrical load when operating for an unlimited number of hours per year under agreed operating conditions, within the maintenance intervals and procedures prescribed by the manufacturer.

Standby power (ESP) – ISO 8528

Standby power (ESP) is the maximum power available at a variable load, under the operating conditions provided, that a generator is able to provide in case of power failure or under test conditions, maintenance intervals and procedures being performed as prescribed by the manufacturer.

Fill in the offer request: