Standard features
| 2 independent welding positions – 400A each |
| High frequency digital control of welding current and voltage |
| Specific welding programs for cellulose electrodes |
| Double welding scale (50%/ 100%) |
| Auxiliary power available during welding |
| Digital ammeter and voltmeter with presets |
| Engine protection |
| Emergency stop button |
| In accordance with European Commission directives |
| Model | ESE 2 x 400 PS |
| Engine | Perkins 1103A-33TG1 (1500 rpm) |
| Aternator | Three-phase, asynchronous, brushless |
| Fuel | Diesel |
| Current range, continuous | 2×10 ÷ 400 A (bar-TIG) 2×16 ÷ 36 V (flux-cored MIG) |
| Duty cycle | 2×400 A – 35% | 2×360 A – 60% | 2×330 A – 100% |
| Open circuit voltage | 68 V |
| Frequency (Hz) | 50 Hz |
| Three-phase power | 40 kVA / 400 V / 57.8 A |
| Single-phase power | 20 kVA / 230 V / 87 A |
| Single-phase power | 5 kVA / 48 V / 104 A |
| Dry weight | 1350 |
| Tank capacity | 102 |
| Fuel consumption (welding 60%) | 6.7 l/h |
| Sound pressure LpA | 64 dB(A) @ 7m |
| Prize | 2x400V 32A 3P+N+E CEE, 1x230V 32A 2P+E CEE, 2x230V 16A 2P+E CEE, 2x48V 32A 2P+E CEE, 2 DINSE 200 A sockets for 48V |
Accessories
| Site trailer |
| Car trailer with RAR card |
| Welding cables 20m+15m, 50mm² |
| Remote control cable with 90° connector (20m cable) |
| Remote control cable with 90° connector for version with changed polarity (20m cable) |
| Remote control extension (30m cable) |
| Remote control cable extension (30m cable) |
| Plowing kit |
| Mig-mag wire feeder |
| Welding kit |
| Tank lid with key |
| Heater |
| Main battery switch |
| Water temperature and oil pressure gauges |
| Oil drain pump |
| Izometer |
| Drum with spark protection |
| VRD – Voltage Regulating Device |
| Polarity change |