Standard features
| High frequency digital control of welding current and voltage |
| Specific welding programs for cellulose electrodes |
| Double welding scale (50%/ 100%) |
| Digital ammeter and voltmeter with presets |
| Auxiliary power available during welding |
| Engine protection |
| Emergency stop button |
| In accordance with European Commission directives |
| Model | ESE 500 YS |
| Engine | Yanmar 4TNV88 (1500 rpm) (Stage 5) |
| Aternator | Three-phase, asynchronous, brushless |
| Fuel | Diesel |
| Current range, continuous | 20A ÷ 500A (bar-TIG) 16V ÷ 40V (flux-cored MIG) |
| Duty cycle | 500A – 60% | 450A – 100% |
| Open circuit voltage | 62 Vcc (65 Vcc peak) |
| Frequency (Hz) | 50 Hz |
| Three-phase power | 16 kVA (12.8 kW) / 400 V / 23.1 A |
| Single-phase power | 10 kVA / 230 V / 43.5 A |
| Single-phase power | 5 kVA / 110 V / 45.5 A |
| Dry weight | 720 |
| Tank capacity | 60 |
| Fuel consumption (welding 60%) | 3.15 l/h |
| Sound pressure LpA | 69.5 dB(A) @ 7m |
| Prize | 1x400V 32A 3P+N+E CEE, 1x230V 32A 2P+E CEE, 1x230V 16A 2P+E CEE, 2 DINSE 200 A sockets for 48V |
Accessories
| Site trailer |
| Car trailer with RAR card |
| Welding cables 20m+15m, 50mm² |
| Remote control cable (20m cable) |
| Remote control extension (30m cable) |
| Remote control cable for version with changed polarity (20m cable) |
| Plowing kit |
| Welding kit |
| Mig-mag wire feeder |
| Drum with spark protection |
| Tank lid with key |
| Izometer |
| Drum with spark protection |
| VRD – Voltage Regulating Device |
| Polarity change |
